These specifications are appropriate for single and dual monitor set ups. If you have three or four monitors, you need a higher performance processor, video card, and network connection. (Multiple monitors available only for CQG IC.)
Beginning with CQG IC version 19, CQG products cannot be installed on PCs running the Windows Vista operating system
|
|
Minimum Requirements |
Recommended |
|
Operating System |
Windows 10, Windows 8, and Windows 7 |
64-bit Windows 10 |
|
Processor |
Dual-Core. Intel Core 2 Duo (2.33GHz or better) |
Intel Core i5 or i7 |
|
Memory |
4GB RAM |
6GB DDR3 SDRAM or more |
|
Hard Drive |
200GB, 7200RPM with 4GB of free hard disk space |
128GB (or higher) solid state drive with 20% of free disk space |
|
Video Card |
Dual port graphics adapter with 128Mb of memory, 64Mb per port |
1GB DDR3 or better |
Internet Access: Internet service via a high-speed connection, such as DSL, cable, or fixed wireless/wireless local loop (WLL). Wireless internet connections not recommended, especially broadband over a wifi card. Dial up not supported.
System Setting Requirements: Hibernate and standby modes cannot be used on a system running CQG IC. Hard drive power-saving features should also be disabled.
Note: Your system may prevent CQG software from opening if you have enabled Windows compatibility mode. To avoid this issue, you should disable compatibility mode.